Things To Be Aware Of Before Using A Vacuum Packaging Machine

Today we High Quality Automatic Soap Wrapping Machine Factory come to summarize Things to be aware of before using a vacuum packaging machine.

The precautions for the use of High Productivity Soap Wrapping Machine, so as to avoid unnecessary damage to the machine, vacuum packaging machine is one of many mechanical equipment, is a vacuum packaging machine equipment that is popular on the market now, let's come together Take a look at the precautions for using the vacuum packaging machine.

1. Turn on the power: According to the power cord, plug it into the appropriate power socket, turn on the power, the indicator light of the power will light, select the vacuum time and pumping time according to the product;

2. Place the package containing the product in a vacuum chamber, and place the bag on the heat seal strip neatly;

3. Press down the cover of the vacuum packaging machine, the pumping/vacuum indicator on the control panel lights up, the vacuum pump starts pumping, the cover is automatically sucked, and the vacuum button can adjust the degree of vacuum according to the packaging requirements. The adjustment should be from low to high, and the adjustment range should not be too large;

4. When the pumping reaches the set time, that is, when the vacuum is completed, the pumping is finished, and the pumping indicator is turned off. If the inflating function is required, it needs to be adjusted to the inflating function;

5. When the single-chamber vacuum packaging machine is exhausted, the indicator light will also be extinguished, the heat-sealing indicator light will be on, and the sealing stage will be entered. The control panel has a heat-sealing time and a temperature adjustment button to adapt to different materials and different thicknesses of the packaging bag. ;

6. When the set heat sealing time is reached, the heat sealing indicator is extinguished, indicating that the heat sealing process is finished, the vacuum chamber enters the atmosphere through the solenoid valve, and the lid of the vacuum chamber is automatically bounced, and the vacuum packaging process is finished. Carry out the next vacuum packaging.

Read more »

How To Mark The Packaging Machinery?

Here is Soap Wrapping Machine exporter talking about How to mark the packaging machinery.

If you have any idea about Soap Wrapping Machine For Various Shape, welcome to contact us and discuss.

In order to ensure the integrity of the logo pattern on the packaged finished bag, the color code for positioning is usually printed when the packaging material is produced. When using such a color-coded packaging material, the color mark can be tracked and positioned by a photoelectric switch (electric eye), and the stepping motor is driven to rotate by the control system and automatically stopped according to the distance between the color marks, so that the finished product logo pattern is complete and accurate.

The main product lines of packaging machinery are quantitative packaging scale, vacuum packaging machine, baler, strapping machine, sealing machine, bagging machine, carton forming machine, packing machine, winding machine, labeling machine, stacking machine, and design. Various conveying lines; at the same time, we produce and sell various packaging materials such as packing belts and stretch film.

Read more »

Working Function Of Vacuum Packaging Machine

As a manufacturer of Automatic Soap Pe Film Wrapping Manufacturer, we will discuss Working function of vacuum packaging machine with you.

The promotion of small packaging and the development of supermarkets, the packaging machinery has occupied a high position in our life, and its scope of application will become more and more extensive, so we need to understand the working principle of packaging machinery such as vacuum packaging machine. And the scope of use.

The scope of the use of vacuum packaging machines is:

1.salted products: sausage, ham, bacon, plate duck and so on.

2. pickles: mustard, dried radish, kohlrabi, kimchi and so on.

3.soy products: dried tofu, vegetarian chicken, bean paste and so on.

4.cooked food products: roast chicken, roast duck, sauce beef and so on.

5. convenient food: rice, instant noodles, cooked vegetables, etc.

6. soft canned: clear water bamboo shoots, sugar water fruit, eight treasure porridge and so on.

The main functions of vacuum packaging are:

1. Deoxidation, in order to help prevent food spoilage, the principle is relatively simple, because food spoilage is mainly caused by microbial activity, and the survival of most microorganisms (such as mold and yeast) requires oxygen, and vacuum Packaging is the use of this principle to remove the oxygen in the packaging and food cells, so that the microbes lose the "environment of survival". Experiments show that when the oxygen concentration in the packaging is ≤ 1%, the growth and reproduction speed of microorganisms is sharp. When the oxygen concentration is ≤0.5%, most microorganisms will be inhibited and stop breeding. Vacuum deoxygenation is in addition to inhibiting the growth and reproduction of microorganisms.

2. To prevent food oxidation, because oily foods contain a large amount of unsaturated fatty acids, oxidized by the action of oxygen, so that food tastes, deterioration. In addition, oxidation also causes loss of vitamins A and C, and unstable substances in the food coloring matter are affected by oxygen to darken the color. Therefore, it can effectively prevent food from spoiling and maintain its color, aroma, taste and nutritional value.

For more information on Automatic Soap Pe Film Wrapping Machine, please contact info@topcnmachine.com or call us.

Read more »

Causes And Troubleshooting Methods For Common Failures Of Wrapping Machine

Here is Soap Wrapping Machine manufacturer talking about Causes And Troubleshooting Methods For Common Failures Of Wrapping Machine.

If you have any idea about it, welcome to contact us and discuss.

Causes and troubleshooting methods for common failures of packaging machines

Fault 1: The vacuum pump is not working or there is serious noise

the reason:

1. The power supply is out of phase or the fuse is open;

2. The vacuum pump is reversed;

3. Poor contact of IC main contact points.

4. ISJ normally closed contact is bad.

Method of exclusion:

1. Check the power supply line or change the fuse.

2. Power supply commutation.

3. Adjust or renew.

4. Adjust or renew.

Fault 2: no heat seal

the reason:

1. The nickel chrome skin is burned off.

2. The heat-sealed circuit line is loose and open.

Method of exclusion:

1. Replace it.

2. Tighten and reconnect. Imported pump

3. Adjust or renew.

4. Check if the 1SJ normally open 2SJ normally closed contact is good.

Fault 3: vacuum is not enough or no vacuum

the reason:

1. The bag is leaking.

2. There is no vacuum in the heat-sealed air chamber during vacuum.

3. The seal on the 1DT iron core seal or magnetic shield leaks.

Method of exclusion:

1. Change the packaging bag.

At the same time, Customized Toilet Block Wrapping Machine can be offered for you.  Looking forward to receiving your inquiry.

Read more »

Daily Maintenance Of Packaging Machinery

Here is High Quality Automatic Soap Wrapping Machine talking about Daily maintenance of packaging machinery.

If you have any idea about it, welcome to contact us and discuss.

Several key points for the maintenance of packaging machinery: cleaning, fastening, adjustment, lubrication, anti-corrosion. In the ordinary production process, each machine maintainer should do it. According to the maintenance manual and maintenance procedures of the machine packaging equipment, strictly carry out various maintenance work according to the specified period, reduce the wear speed of the parts, eliminate the hidden troubles of the fault, and prolong The life of the machine.

Maintenance is divided into: routine maintenance, regular maintenance (minute: primary maintenance, secondary maintenance, tertiary maintenance), special maintenance (point: for seasonal maintenance, disable maintenance).

Routine maintenance:

With cleaning, lubrication, inspection, and fastening at the center, routine maintenance should be carried out as required during and after the work of the machine.

The first-level maintenance work is carried out on the basis of routine maintenance. The key work is to lubricate, tighten and inspect all relevant parts and their cleaning work.

The secondary maintenance work focuses on inspection and adjustment. Specifically check the engine, clutch, transmission, transmission components, steering, and brake components.

The third-level maintenance focus is to detect, adjust, troubleshoot and balance the wear of each component. Diagnose and condition check the parts that affect the performance of the equipment and the parts with fault signs, and then complete the necessary replacement, adjustment, and troubleshooting.

At the same time, High Productivity Soap Wrapping Machine can be offered for you.  Looking forward to receiving your inquiry.

Read more »

Acceptance Requirements For Stainless Steel Storage Tanks

Here is Top Open Water Storage Tank Manufacturer talking about Acceptance requirements for stainless steel storage tanks.

If you have any idea about it, welcome to contact us and discuss.

1. The construction, inspection, and acceptance of the anti-corrosion engineering of stainless steel storage tanks shall be carried out in strict accordance with the "Technical Specifications for Corrosion Protection of Petrochemical Equipment and Pipeline Coatings". After the surface of the anti-corrosion materials is dry, the primer film shall be applied to the bottom layer, the intermediate layer, and the surface layer respectively. Dry film thickness measurement, the dry film thickness of each layer and total dry film thickness of the coating shall meet the relevant requirements in this regulation.

2. Check the number of coating passes and the quality of the coating, and perform a visual inspection after the coating is completed. The main inspection contents of the coating quality include: whether the coating has leakage coating, rust, air bubbles, bottoming, sag, wrinkle, etc. Whether the coating is smooth and smooth, the color is uniform, and the coating is detected by a magnifying glass of 5 to 10 times. In the case of pinholes, or by using the wet sponge method, the pinhole rate of the coating shall be checked, and the sampling rate shall not be less than 5% of the coated area.

3. When brushing the paint, measure the wet film thickness with a wet film thickness gauge.

4. After the stainless steel storage tank is finished with anti-corrosion coating, after the paint film is dried, the thickness of the coating is measured by a thickness gauge.

5. The thickness of the stainless steel storage tank coating is required to be uniform. The acceptance standard adopts the “90-10 rule”, that is, 90% of the measured value should reach the specified dry film thickness, and the 10% value is allowed to be low, but it is greater than the “specified value of 90”. %", otherwise the number of coatings should be increased until it is qualified.

6. For the conductive coating, after the construction is completed and the paint film is dried, the resistivity of the coating is measured by the paint resistivity meter. The surface resistivity of the coating electrical property test results should be less than 109 Ω, or the volume resistivity is less than 108Ω.m, and the test results should be within the same order of magnitude.

At the same time, Stainless Steel Storage Tank For Food can be offered for you.  Looking forward to receiving your inquiry.

Read more »

Prefabrication Method For Tank Wall Of Stainless Steel Storage Tank

Today we Horizontal Storage Tank Supplier to come to summarize Prefabrication method for tank wall of stainless steel storage tank.

The stainless steel storage tank is a single or multi-layered vertical or horizontal structure of hygienic clean stainless steel container equipment. It is a liquid storage device commonly used in bioengineering, food, beverage, fruit wine, condiment, chemical, grease, and other industries.

The prefabrication method for the tank wall of stainless steel storage tanks is as follows:

1. For tanks with a diameter of fewer than 25 meters, the width of the wall shall not be less than 1000mm and the length shall not be less than 1000mm;

2. For tanks with a diameter greater than or equal to 25 meters, the width of the wall shall not be less than 1000mm and the length shall not be less than 2000mm;

3. The interval between the longitudinal weld of the bottom wall panel and the butt weld of the bottom edge of the tank bottom shall not be less than 300 mm, and the longitudinal joint spacing between the upper and lower rings shall not be less than 500 mm;

4. The spacing between the opening of the tank wall or the opening of the hole receiving the reinforcing ring and the longitudinal ring of the tank wall shall be greater than 8 times of the size of the welding foot and not less than 250 mm.

If you are interested in Stainless Steel Essential Oil Tank, please inform us info@topcnmachine.com.

Read more »

What Is The Difficulty In Making Stainless Steel Storage Tanks?c

Here is Customized Stainless Steel Storage Tank Manufacturertalking about What Is The Difficulty In Making Stainless Steel Storage Tanks.

If you have any idea about Stainless Steel Storage Tank For Food, welcome to contact us and discuss.

The stainless steel storage tank is a storage tank made of stainless steel. How is stainless steel made as the main material? What are the difficulties?

Stainless steel tanks can withstand higher pressures than conventional rotomolding tanks and are used in many applications. The tank sealing performance is good, so as to avoid the intrusion of harmful substances and mosquitoes in the air, so that the liquid stored in the tank is not polluted by the outside. The above advantages make the stainless steel storage tanks mostly used for storing food, medicine, and used in the wine industry and the dairy industry.

The production of stainless steel storage tanks pays attention to the practical and beautiful view. Therefore, in the production process of stainless steel container equipment, it is very important to pay attention to the difficult processing of raw stainless steel. In the construction of stainless steel, the general steps and procedures are material shot blasting - coating part of the coating - welding, fabrication, installation, pressure test - reprocessing - coating follow-up paint.

The cleaning of the metal surface of the stainless steel tank body, the surface pretreatment of the material, and then the primer is sprayed. After the tank body is completed, the surface of the tank bead is cleaned, and the primer is applied, and then The entire tank is sprayed with intermediate paint and topcoat.

The hardness of stainless steel during processing causes the tool to wear faster and is more difficult to chip. The low thermal conductivity of stainless steel causes plastic deformation of the cutting pin and faster tool wear. The chemical relationship between the tool and the material being processed results in work hardening and low thermal conductivity of the material being processed, which not only causes uneven wear but also causes chipping and abnormal cracking of the tool. When processing stainless steel container equipment, the built-up edge easily causes the small pieces of debris to remain on the cutting edge and cause poor processing of the surface.

Read more »

soap mold making

soap making mold come in a somewhat overwhelming amount of styles, shapes and sizes. Your mixture has finally reached saponification and you're ready for the final step of creating the actual bars. So, What do you use to create the soap's shape and complete your work of art?

Are you looking to buy a soap making mould? This is the best method of molding your soap for the cold process soap maker!

There are seemingly endless possibilities of how you can make your finished product look. That's all part of the fun! On this page, my goal is to let you know each of your options for shaping soaps into personal masterpieces and let you in on some tips for this stage in the soap making process. Click on each blue link for a more detailed explanation on that particular soap molding method.

The first method, is purchasing pre-made individual soap making molds. This is a great place to start for beginners because it avoids any type of cutting or beveling and is also great for small batches. All you do is pour the soap into the mold, let it set, and pop out a perfectly formed bar of soap.

This method is not without its downfalls though. You should not use this type of mold when making multiple bar batches using the cold process soap making method.

With the cold process, once your soap is poured into the mold, it needs to be wrapped with towels for insulation during the first 24 hours. Using individual soap mold makes this task rather difficult as you will have to wrap each one separately.

Alternately, you can somehow find a way to group all the smaller molds together (without spilling any of them) so that they can all be wrapped at the same time. This, unfortunately, is much harder then it sounds.

I strongly recommend that you stick to individual molds for melt and pour soap making only. You can get individual bar molds in all different types of intricate designs allowing for a great amount of creativity.

The second method, one that I personally use most often, is to use a wooden soap mold to create somewhat of an "oversized bar of soap" called a soap loaf. This loaf of soap is then cut into smaller, more typical bars using a soap cutter.

You can either buy wooden soap making molds that are made specifically for making soap, or create your own if, of course, you have the necessary carpentry equipment.

Before you cut the soap into bars, make sure that it had enough time to cure in the wooden soap mold. This should take approximately 24 - 36 hours.

The rest of the curing needs to be done after the soap is removed from the mold and placed on a rack for air to circulate around it.

The third and final method is to tap into your creativity and make your own unique soap molds. The sky is the limit with what you can do. It's a lot of fun; so try and think outside the box!

My only word of advice is to make sure that what you are using as a mold will withstand the caustic properties oflye and uncured soap. The last thing you want to happen is for your curing soap to eat through the mold, and then damage your table or counter top!

For more information about soap mold making pls link here http://www.topcnmachine.com/soap-making-machine/

Read more »