Toilet Soap Finishing Making Production Line

Toilet Soap Finishing Making Production Line  use soap noodles as raw materials.The process of making  toilet soap starts with the mixing for soap noodles and perfume. Then the mixed soap noodles enters into  three  roller mill, where thin soap sheets are made.  Then the soap materials go to soap plodder, where  are grinded and extruded  into long soap strip.Then the long soap strip are stampped into the required size by stampping machine . Finally the soap bars gets packed by packing machine.

Machines involved for making laundry soap

1.  Mixer

Used for mixing soap noodles.

2. Three  Roller  Mill

Used for grinding soap noodles into thin sheets.

3. Plodder (Extruder) Machine

Used for molding the sheets into long strip soap of required shape.

4. Stamping Machine

Used for stamping long strip soap into soap bar that is desired size and shap .

5. Packing machine:

individually packed in plastic wrapper,or loose-packed (such as 5bars) in one shrinkage bag.

Toilet Soap Production Line,Toilet Soap Finishing Line, Soap Making Machine

Available complete set of toilet soap making machine

1)capacity: 100—150KG/Hour

2)capacity: 300—500KG/Hour

3)capacity: 800—1000KG/Hour

  

Typical configurations of soap linishing lines are composed with following soap machines

1.saponification tank                 2. crutcher        3.tubular heat exchanger

4.vacuum drying chamber        5.duplex twin worm pelletizer

6. cyclone separator                 7.atmospheric condenser

8.gas-water seperator             9.surge tank       10.vacuum pump

11. conveyor                             12.mixer               13.three-roll mill

14.vacuum plodder                  15.soap cutting machine

16.Soap stamping machine    17.soap packing machine

For more information about Toilet Soap Production Line,Toilet Soap Finishing Line,Soap Making Machine pls email to sales@topcnmachine.com

Read more »

Comparison Of Filling Technology Of Liquid Food

Here is Liquid Filling Machine Manufacturer talking about What are the types of thread detection methods.

With the rapid development of the liquid food industry, the filling technology of liquid food has also developed rapidly. Liquid food filling technology mainly classifies hot filling technology and aseptic cold filling technology.

1. Hot filling technology

The hot filling technology refers to a filling technology in which liquid food is sterilized in a hot state and the inner surface of the container is sterilized by using the heat of the product. The hot filling can be divided into two types, one is high-temperature hot filling, one is medium temperature filling and then the product is heated to 65 ° C ~ 75 ° C for pasteurization. Hot filling technology eliminates the need to sterilize bottles and lids individually, allowing the bottles and lids to be sterilized by holding the product at high temperatures for a sufficient period of time.

2. Aseptic cold filling technology

Aseptic cold filling technology refers to the cold (normal temperature) filling of the product under aseptic conditions. The key control points for aseptic cold filling technology are mainly concentrated in the following three points: the formation and control of the aseptic environment, the aseptic formation, and control of the packaging container, and the aseptic formation and control of the product. In order to meet the requirements of aseptic cold filling, the production line must meet the following basic requirements: the product is subjected to ultra-high temperature instantaneous sterilization to achieve commercial sterility, packaging materials and sealed containers are separately sterilized to achieve sterility, and the filling equipment is sterilized to achieve sterility. The state, filling, and capping are carried out in a sterile environment, the production process is strictly controlled and each critical control point is established, monitored, recorded and controlled.

For more information about Semi Automatic Filling Machine For Chemical, please contact or call us.

Read more »

Poland Customer ordered Semi automatic four head price perfume vacuum bottle filling machine

Tks for poland customer ordered 2 set(*2) Semi automatic four head price perfume vacuum bottle filling machine.After we confirm the machine requirement , we soon put the machine into manufacturing line.Within 7 days we finished the perfume vacuum filling mahcine,the vacuum filling machine was shipped by sea to to Hambury port, Poland. The documentaries certificated with  B/L&Invoice&Packing together with other files necessory are ship to customer forassisting customers to clear the custom.

As below bank copy on the successful transaction between TOPCN and their counterpart:

TSFM-05 small peumatic cream paste bottle filling machine finished:

Vacuum bottle filling machine for perfume testing video before shipping:

vacuum liquid filler semi automatic for perfume water vide machine de remplissage pour le parfume

perfume bottle filler table top perfume liquid filling machine perfume machery vacuum perfume

Four head Installation requirements:

A. Ensure that the air in air-inlet get through from the small orifice of the nozzle center, pipe diameter becoming longer, the air running  speed faster

B.Ensure that the air in the nozzle get through from the orifice of the vent center, not get through from the edge so that guarantee the air running speed faster

C.The joint parts among the generator shell. muffler. screw thread three links must be confirmed sealing well.  

D.Ensure the distance of vacuum region between vent and nozzle, adjust distance in accordance with the actual situation until the vacuum phenomenon is obvious.

Description on the  price perfume vacuum bottle filling machine purchased respectivly pls link http://www.topcnmachine.com/semi-automatic-filling-machine/perfume-filling-machine.html

Package Size	L80*W60*H130cm 0.624CBM
Package Weight	110Kg
Package Material	Standard export wooden case small
Remark	All machines will come with operating manual(English language), spare parts and tools

Automatic essential oil vial perfume filling crimping collaring machine

Automatic small perfume bottle filling machine pocket perfume filling machine

Read more »

Czech Republic Customer ordered Fully pneumatic filling machine semi automatic piston filler

Tks for Czech Republic customer ordered 1 set(*1) Fully pneumatic filling machine semi automatic piston filler.After we confirm the machine requirement , we soon put the machine into manufacturing line.Within 3 days we finished the pneumatic filling machine,The machines was shipped by air to PRAGE air port, Czech Republic. The documentaries certificated with  B/L&Invoice&Packing together with other files necessory are ship to customer forassisting customers to clear the custom.

As below bank copy on the successful transaction between TOPCN and their counterpart:

TSFM-01 small peumatic cream paste bottle filling machine finished:

Fully pneumatic filling machine testing video before shipping:

TSFM-01 semi automatic piston filler for cream and liquid, install hopper for cream filling, install suction tube for liquid filling

Here is video how to install the hopper and suction tube

How to install pneumatic semi automatic cream paste bottle filling machine hopper

How to install pipe of Semi Automatic Vertical pneumatic bottle filler piston jar filling machine

5mm and 8mm filling nozzles as customer requirment

Description on the pneumatic filling machine purchased respectivly pls link http://www.topcnmachine.com/semi-automatic-filling-machine/semi-automatic-pneumatic-bottle-filler-piston.html

Package Size	138*48*55cm(100-1000ml)  0.354CBM
Package Weight	60Kg
Package Material	Standard export wooden case small
Remark	All machines will come with operating manual(English language), spare parts and tools

TSFM01-250 horizontal type semi automatic self suction 250ml liquid soap filler export to Thailand

Semi-Auto Heating & Mixing filling machine filling volume testing

Semi-Automatic Piston Filler For Liquid Paste Cream Lotion Filling With 2 heads Vertical Hopper

Read more »

Hot Filling Technology Analysis

Here is Automatic Filling Machine For Liquid Manufacturer talking about Hot filling technology analysis.

If you have any idea about Liquid Filling Machine, welcome to contact us and discuss.

Since the birth of the warm filling technology in China, the filling production line using this technology has matured in just a few years and has formed a certain market scale.

 

The emergence of hot-filled plastic bottles is also the result of such an opportunity. The development of plastic bottles has undergone several processes such as the addition of PEN and the application of barrier coatings. At present, the more feasible solution is to use multi-layer bottle production technology. EVOH or nylon is used as the barrier layer in the middle. However, it is not clear when the market starts due to cost and other factors. PC is currently making 5 gallons of drinking water. The main material of the barrel, it has been reported that PET drinking buckets can also meet the quality requirements, but in a short time, PET plastic bottles still have no possibility to replace PC.

This technology is based on the temperature limit of ordinary PET bottles (the hot filling process requires PET bottles to withstand high temperatures above 92 °C and no deformation phenomena such as bottle wall collapse), through the matching filling production line and irrigation. The environment and subsequent processes are used to achieve product preservation without adding any preservatives. Through production practice, it has been shown that the beverages produced by non-heat-resistant PET bottles have reached the sanitary technical indicators of heat-resistant PET bottled beverages and the relevant national standards. The shelf life of the products has reached more than one year.

Hot filling containers, from glass to plastic bottles. Goya Foods Inc., the largest Hispanic food company in the United States, said it has replaced glass bottles with PET plastic bottles and has designed hot-fill containers from Amcor in Latin America, as well as a newly designed heat-shrinkable label. This is an opportunity for the plastics industry to undoubtedly usher in development.

Hot-fill containers have significant performance and cost advantages, including portability, reduced breakage, recyclability in response to sustainability requirements, reduced transportation costs, and reduced carbon footprint. Compared with the traditional glass bottle packaging, consumers are favored for this PET bottle with its eye-catching appearance and lightweight.

At the same time, Semi Automatic Liquid Bottle Filler can be offered for you.  Looking forward to receiving your inquiry info@topcnmachine.com.

Read more »

Video-automatic Filling Production Line

Topcn Machinery is mainly engaged in chemical, design chemical, food, pharmaceutical machinery, water treatment, Lipstick Filling Machine, capping equipment, labeling equipment manufacture, installation and commissioning of professional production companies. Homogeneous emulsion manufacturing joint German team and packaging machinery companies in Taiwan, developed high-quality production equipment, according to the actual situation, manufacture sell various models of customer satisfaction dispersed emulsion homogenize efficient, high-quality vacuum emulsifying series devices, and more function stirring series, washing Series equipment, filtration equipment, water treatment equipment, filling and conveying equipment.

Follow us:

Website:https://topcnmachine.en.alibaba.com

Website:http//www.topcnpackagemachine.com

Email:info@topcnmachine.com

Read more »

Nigeria Customer ordered 5L High Shear Double Shaft Vacuum Industrial Chemical Mixer

Tks for Nigeria customer ordered 1 set(*1) 5L vacuum mixer. After we confirm the machine requirement , we soon put the industrial mixer into manufacturing line.Within 30 days we finished the sCHEMICAL MIXER,The double shaft mixer was shipped by air to Lagos, Nigeria. The documentaries certificated with  B/L&Invoice&Packing together with other files necessory are ship to customer forassisting customers to clear the custom.

As below bank copy on the successful transaction between TOPCN and their counterpart:

High Shear Double Shaft Vacuum Industrial Chemical Mixer Finished  :

The vacuum mixer testing video before shipment:

Technology of double shaft vacuum mixer

Voltage	AC 380V, 50HZ
Power	0.75KW
Warranty	One Year limited warranty with lifetime support
Rotation speed	0-170 r/min, Through the inverter speed control
Revolution speed	0-65r/min
Effective volume	2L, 3-10 Liters Customized according request
Disperse power（Kw）	0.18
Disperse speed（rpm）	0-1400
Disperse disk dia（mm）	Ф40
Design volume	2.5L
Dimension(H*LW)	1000*450*1450mm
Weight	350Kg

Package of Double Shaft Vacuum Industrial Chemical Mixer

Description on the double shaft chemical mixer purchased respectivly pls link http://www.topcnmachine.com/small-mixer-amp-homogenization/double-shaft-vacuum-industrial-chemical-mixer.html

Read more »

Basic Parameters Of The Automatic Filling Machine

1. Check before use: After the Cosmetic Lotion Filling Machine is installed, turn on the power, test the three-phase motor, ensure the correct running direction, ensure the pressure and flow of compressed air, check whether the motor, bearing, etc. need to add lubricating oil, and strictly prohibit oil-free operation. 
   

The Small Cream Paste Filling Machine can be started normally, and the fasteners of each part are observed to be loose. After the operation of each part is stable, it can be used normally;

2. Check that the safety facilities are functioning properly;

3. Before starting the Cream Paste Filling Machine, carefully check whether all the water tanks have water, whether the chain plate is stuck, whether there is any debris on the conveyor belt, whether there is a bottle cap in the lid, whether the water source, power source, and gas source are several barrels. After you press the ready, when the main power is turned on, the power indicator is on, the fault indicator and the emergency stop indicator are not lit, then the start condition is met, press the start button on the control box and the start switch at the filling station, in the buzzer three After the sound warning, the whole machine starts running, enters the automatic washing mode of external washing, rinsing and filling. When the machine stops, press the stop button at the filling station and the control box to stop the main power supply.

Read more »

Principles Of Laboratory Shear

Here is Soap Cutting Machine Manufacturer talking about Laboratory Shear. 

If you have any idea about it, welcome to contact us and discuss.

Emulsification must be at least two substances: immiscible, or difficult to dissolve or no chemical reaction. The emulsification process is from one substance dispersed phase to another substantially continuous phase.

The goal of most emulsification processes is to achieve a dispersed emulsion or suspension, both of which are a mixture of liquid substances. The dispersing phase of emulsification is the process of liquefying the sample. In the production of suspended solids, the solid particles must be evenly distributed in the liquid.

Laboratory shear emulsification machine dispersion process is based on the rotor and stator cutting principle. The experimental equipment is a high-speed motor-driven shear emulsification head, to promote high-speed rotor for the circumferential telecentric. High-speed rotation of the rotor with the precision of the stator to form a high-frequency, strong circumferential tangential velocity, angular velocity, and other synthetic kinetic energy, to promote the experimental material from the bottom of the experimental inhaled rotor zone, and under the action of huge centrifugal force from the stator hole Throw out. Set, the rotor in a reasonably narrow gap to form a strong, reciprocating hydraulic shear, friction, centrifugal extrusion, fluid collision, and other comprehensive effects. Experimental materials in the container cycle back and forth above the process, and withstand tens of thousands of times per minute shear, tear, impact and mixing, so as to achieve the shear emulsification effect, the efficiency of about a thousand times higher than ordinary mixing.

Laboratory shear emulsifying machine is suitable for tissue dispersion in the field of biotechnology, sample preparation in the pharmaceutical field, enzymatic treatment in the food industry, liquid and liquid phase, liquid and a solid phase in the pharmaceutical industry, cosmetics industry, paint industry and petrochemical industry Experimental aspects. The test medium can be squeezed in the liquid material, strong impact and decompression under the triple action of the role of refinement, more evenly mixed with each other to prevent or reduce delamination with the liquid. Such as dairy products, beverages, cosmetics, pharmaceuticals, and other products in the production process of homogenization, emulsification process.

The different specifications working head stator configuration of laboratory shear emulsification machine is designed to meet the needs of different experiments. Covering a broader application surface - crushing, emulsifying, homogenizing, polymerizing, suspending, dissolving and stirring, etc.

At the same time, Pneumatic Driven Small Soaps Slicing Machine can be offered for you. Looking forward to receiving your inquiry info@topcnmachine.com.

Read more »