Basic Parameters Of The Automatic Filling Machine

1. Check before use: After the Cosmetic Lotion Filling Machine is installed, turn on the power, test the three-phase motor, ensure the correct running direction, ensure the pressure and flow of compressed air, check whether the motor, bearing, etc. need to add lubricating oil, and strictly prohibit oil-free operation. 
   

The Small Cream Paste Filling Machine can be started normally, and the fasteners of each part are observed to be loose. After the operation of each part is stable, it can be used normally;

2. Check that the safety facilities are functioning properly;

3. Before starting the Cream Paste Filling Machine, carefully check whether all the water tanks have water, whether the chain plate is stuck, whether there is any debris on the conveyor belt, whether there is a bottle cap in the lid, whether the water source, power source, and gas source are several barrels. After you press the ready, when the main power is turned on, the power indicator is on, the fault indicator and the emergency stop indicator are not lit, then the start condition is met, press the start button on the control box and the start switch at the filling station, in the buzzer three After the sound warning, the whole machine starts running, enters the automatic washing mode of external washing, rinsing and filling. When the machine stops, press the stop button at the filling station and the control box to stop the main power supply.