1:07:00 AM
Kent Zhu
High-Speed Dispenser for Lifting Paint & Oil ink Industry double Shaft Strong Vacuum Homogenize applies to disperse high solid content, large proportion or strong suspending. Also you can use this machine to advance the dispersion efficiency and distribution.
Technology of 1400L High-Speed Disperser
High-speed Disperser
Power Supply: 380V, 50Hz, 3-phase.
With 55Kw Schneider/Emerson inverter, performing
various speed control.
Two layers of dispersing disc, any layer can be
Power Supply: 380V, 50Hz, 3-phase.
Power: 22kw WANNAN Ex.proof motor
With gear reducer (Tongli/ Dongli)
Hydraulic lift, convenient operation.
removed. Diameter: 350mm
Material: the part contacting with materials is
Stainless Steel 316L.
Scraper
Major shaft speed: 35rpm
Material: the part contacting with materials is
Stainless Steel 316L.
Anchor agitator with scraper to scrap the bottom and
the side of the tank, avoiding dead corner.
With PTFE scraper for all and tank bottom.
Lift height: 1500mm
With NSK Bearings.
Clamping Device without
With tank fixing: The tank bottom is with fixing slot
Vacuum Cover
With closed cover, with materials charging port
With liquid charging port
With power charging port
With sight glasses (With one Ex.lamp)
With Manometer
With vent port
With one spare port etc.
With big flange matches with the tank well
Hydraulic Station
Single Pole Stand.
Hydraulic Station Power: 5.5kw.
Electrical Part
With EMERGENCY STOP button on the machine
body.
With electric control cabinet.
Size: 1300*1050mm
Material: The part contacting with medium is
SS316L, other part is carbon steel quoted with antirust
paint.
Three layers. Inner layer is 8mm.mid layer 5mm
The outmost layer is 3mm.
With big flange, suitable for vacuumizing.
With outlet ball valve for discharging materials.
Inside and outside are mirror polished, easy to clean,
without residue.
With flat bottom dished end
Sensor of temperature should be connected with
heating element ( coil heater) which means that this
two elements must be junctioned.
Metal building protection electric part against stains
With Schneider low-voltage components.
operation.
The control of the two agitator can be operated
With lables on the machine as required.
Without tank
Vacuum system
Water-vane vacuum pump 5.5kw
15L buffer tank
Tank
Volume: 1400L
Size: 1300*1050mm
Material: The part contacting with medium is
SS316L, other part is carbon steel quoted with antirust
paint.
Three layers. Inner layer is 8mm.mid layer 5mm
The outmost layer is 3mm.
With big flange, suitable for vacuumizing.
With outlet ball valve for discharging materials.
Inside and outside are mirror polished, easy to clean,
without residue.
With flat bottom dished end
Sensor of temperature should be connected with
heating element ( coil heater) which means that this
two elements must be junctioned.
Metal building protection electric part against stains
Posted in: 
0 评论:
Post a Comment